Installing photo-eye sensors on a garage door (or more than one garage door) is a safety feature that keeps the door from closing if it sees something in the way. This way, any cars, people, or animals that might be in the way of the door when it opens will be safe. Photo eye gates sensors repair service can help you understand better.
On each side of the garage door, about 6 inches from the floor, there is a photo-eye sensor repair service.
When the garage door closes, one of the sensors sends a beam toward the other. If something breaks the beam, the other sensor knows not to close the door. When the image eye sensors in your camera aren’t lined up right, you have to change the settings. This happens more often than you might think.
First, make sure that nothing is getting in the way of the sensors’ ability to talk to each other. If there happen to be a physical obstacle between two sensors, they can’t talk to each other. Photo eye gates sensors repair service will make sure that the sensors are turned on and that the cables that connect them are not frayed or otherwise damaged. As long as everything works, you can manually realign your photo-eye sensors by making small changes until they are in the right place.
Because the sensors are so sensitive, you have to be careful when you change them.
When you move the dark sensor back into place, you’ll see that the light is back on. After you’ve done this, your door should work as it should. If it still doesn’t work, you could check to see if the units themselves are dirty. With the help of Photo eye gates sensors repair service, wipe each sensor’s lens clean to get rid of dust and other dirt.
After making the right changes to your photo-eye sensors and making sure they are not blocked by anything or dirty, test your door to make sure it works quickly and smoothly. Once you have finished the last step, you can move on to this one.